</P><P>
4000Pa Powerful suction fan blower Vacuum dust and debris in one go
Stronger fan blower suction power allows you to clean your home more efficiently. With the 4000Pa fan blower suction power, your daily cleaning needs can be met easily. The 4 suction power settings allow you to clear away dust, hair and large particles in one go.
</P><P>Up to 2 hours of battery life Easily handle large homes
5200mAh nominal battery capacity. Last up 2 hours in Standard mode, offering you greater peace of mind. The robot is capable of cleaning over 200㎡ areas with one pass in Standard mode, more than enough to handle large rooms.
</P><P>Pressure mopping at constant moisture Effectively remove stains, 4 times the cleaning power
The dual mop pads rotate at high speeds to simulate the effect of manual pressure mopping, greatly improving the cleaning power and effectively removing wet, dry and other stains.
</P><P>
Double-layer composite mop pads Strong water absorption and effective removal of stains
Mop pads made of woven fabrics (80% polyester + 20% modified polypropylene fibre) retain moisture evenly.
Powerful cleaning performance effectively removes floor stains when mopping and can effectively protect floor surfaces throughout the house.
</P><P>
Tech specs Item Dimensions
350×350×97 mm
Rated Power
55 W
Charging Time
Approx. 6 hours
Net Weight Robot Vacuum
3.8 kg
Battery
4800 mAh (Rated Capacity)
5200 mAh (Nominal Capacity)
Rated Voltage
14.4 V
Drop sensor Used to detect steps and drops
Robot will back up when the sensor detects a drop in height against typical media of approximately 85mm (white) or 15mm (black)
Ultrasonic sensor
Used to identify carpet material
LDS laser sensor
Used in image formation
Model in use is the D2M, the corresponding measurement distances are White: 0.15–8m and Black: 0.15–4m
Line laser sensor
Used to detect small obstacles
Laser can reach 50–400mm in a straight line
AI Visual identification sensor
Used to detect certain obstacles and furniture.
Extended edge sensor
Used along the wall
IMU Sensor
Robot vacuum motion status detection
Motion can be detected in the following areas: Acceleration ranges ±2g/±4g/±8g/±16g，Gyroscope
ranges from ±125°/s to ±200°/s
Drive wheel lift sensor
Used to detect if drive wheel is off the ground
Detects if wheels are lifted and triggers the drive wheel to stop if lifted in motion
Air pressure sensor
Test for dust collection capacity and blocked ducts
